Search
Filters
Close

Weld Star - CF2 (G3Si1) Wire (1.2mm) 18kg

★★★ ONLINE QTY BREAK ON 56+ ★★★
Availability: In stock
Order Code: 3010200841

Features and Applications

A non-copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels.

Environmentally friendly when compared against traditional copper wires offering less fume and smoke in the working environment.

Advantages of a stable arc when working with increased welding speeds that achieves high quality welds with almost no spatter.

Good mechanical properties at sub-zero temperatures down to -40ºC.

Vacuum-sealed plastic bag packaging to prevent moisture absorption.

Fitted with alignment hole clip to ensure smooth feeding.

Precision layer wound for superior wire feeding characteristics.

Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc.

Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.

Test Certificates can be found online @wilkinsonstar247.com

 

Typical Base Materials

S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML*
* Illustrative, not exhaustive list

 

Standards
EN ISO 14341-A - G 42 3 C1 / G 42 4 M21 3Si1
AWS A5.18 - ER 70S-6

 

Chemical Composition % (Typical)
C% Si% Mn% P% S% Cu%
0.07 0.85 1.45 <0.025 <0.025 0.010
           
Cr% Ni% Mo% Al% V% Zr+Ti%
<0.15 <0.15 <0.15 <0.020 <0.030 <0.15

 

Mechanical Properties (Typical)
Shielding Gas C1 M21
Tensile Strength 540 MPa 580 MPa
Yield Strength 440 MPa
460 MPa
Elongation 30% 26%
Impact Strength 70 J 90 J
Test Temperature -30ºC -40ºC

Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.

  

Welding Parameters
Ømm Current (A) Voltage (V)
0.80 mm 60-200 18-24
1.00 mm 80-300 18-32
1.20 mm
120-380 18-34

 

Shielding Gases

EN ISO 14175 - C1, M21

 

Welding Positions

EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

 

Packaging Data
Diameter

Weight

Spool Pallet Qty

0.80 mm

1.00 mm

1.20 mm

15 Kg

18 Kg

18 Kg

BS300

BS300

BS300

72

56

56

Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

OK Aristorod 12.50 - ESAB

Features and Applications

A non-copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels.

Environmentally friendly when compared against traditional copper wires offering less fume and smoke in the working environment.

Advantages of a stable arc when working with increased welding speeds that achieves high quality welds with almost no spatter.

Good mechanical properties at sub-zero temperatures down to -40ºC.

Vacuum-sealed plastic bag packaging to prevent moisture absorption.

Fitted with alignment hole clip to ensure smooth feeding.

Precision layer wound for superior wire feeding characteristics.

Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc.

Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.

Test Certificates can be found online @wilkinsonstar247.com

 

Typical Base Materials

S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML*
* Illustrative, not exhaustive list

 

Standards
EN ISO 14341-A - G 42 3 C1 / G 42 4 M21 3Si1
AWS A5.18 - ER 70S-6

 

Chemical Composition % (Typical)
C% Si% Mn% P% S% Cu%
0.07 0.85 1.45 <0.025 <0.025 0.010
           
Cr% Ni% Mo% Al% V% Zr+Ti%
<0.15 <0.15 <0.15 <0.020 <0.030 <0.15

 

Mechanical Properties (Typical)
Shielding Gas C1 M21
Tensile Strength 540 MPa 580 MPa
Yield Strength 440 MPa
460 MPa
Elongation 30% 26%
Impact Strength 70 J 90 J
Test Temperature -30ºC -40ºC

Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.

  

Welding Parameters
Ømm Current (A) Voltage (V)
0.80 mm 60-200 18-24
1.00 mm 80-300 18-32
1.20 mm
120-380 18-34

 

Shielding Gases

EN ISO 14175 - C1, M21

 

Welding Positions

EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

 

Packaging Data
Diameter

Weight

Spool Pallet Qty

0.80 mm

1.00 mm

1.20 mm

15 Kg

18 Kg

18 Kg

BS300

BS300

BS300

72

56

56

Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

OK Aristorod 12.50 - ESAB

CE

UKCA