Features and Applications
ER-NiCrMo-4 is used for the welding of alloys that have similar chemical compositions, this includes dissimilar materials of nickel-base alloys, steels and stainless steels.
Due to the high molybdenum content, this alloy offers excellent resistance against stress & corrosion cracking, pitting and crevice corrosion.
Typically used on pipelines, pressure vessels, chemical processing plants, offshore oil platforms, gas facilities, power generation and marine environments etc.
Test Certificates can be found online @wilkinsonstar247.com
Typical Base Materials
N10276, W.Nr: 2.4819, NiMo16Cr15W, Alloy C4, Alloy C276*
* Illustrative, not exhaustive list
| Standards |
EN ISO 18274 - Ni 6276 - NiCr15Mo16Fe6W4
|
AWS A5.14 - ER NiCrMo-4
|
| Chemical Composition % |
| C% |
Mn% |
Fe% |
P% |
S% |
Si% |
|
| max |
max |
max |
max |
max |
max |
|
| 0.05 |
0.80 |
0.70 |
0.030 |
0.010 |
0.75 |
|
| |
|
|
|
|
|
|
| Cu% |
Ni% |
Co% |
Ti% |
Al% |
|
|
| max |
93.00 |
max |
2.00 |
max |
|
|
| 0.20 |
min |
1.00 |
3.50 |
1.00 |
|
|
Mechanical Properties
|
| Tensile Strength |
≥690 MPa |
|
| Yield Strength |
- |
|
| Elongation |
- |
|
| Impact Strength |
-
|
|
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
Shielding Gases
EN ISO 14175 - TIG: I1 (Argon)
Welding Positions
EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG
| Packaging Data |
Diameter
|
Length
|
Weight |
|
|
1.60 mm
2.40 mm
3.20 mm
|
1000 mm
1000 mm
1000 mm
|
5 Kg
5 Kg
5 Kg
|
|
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.
